P1517 OBD Trouble Code
6 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine control relay - circuit malfunction |
| Cause | Wiring, engine control relay |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Intake Manifold Runner Control Input Conditions |
| Cause | Key on or engine running, then the PCM detected that the IMRC Monitor signal was outside of its expected calibrated range. |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Throttle Actuator Control Module Performance |
| Cause | DTC P1518 not set, key in the crank or run mode, system voltage over 5.23v, then the ETC or TAG module determined that an internal data test did not pass, condition met for under 1 second. |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Park/neutral position (PNP) switch - cranking neutral/drive |
| Cause | Wiring, PNP switch |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Idle air (IAC) control valve circuit 4 - voltage high |
| Cause | Wiring, IAC valve, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine control relay - circuit malfunction |
| Cause | Wiring, engine control relay |
Try also: https://www.obd-codes.com/p1517
