P1406 OBD Trouble Code
1 result found
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | EGR Valve Pintle Position Circuit Conditions |
Cause | Engine at idle, then PCM detected these conditions in these tests • Test 1 The EGR sensor input was 0.18v or less • Test 2: The EGR sensor input was 2.06v or higher • Test 3 The maximum change in Desired EGR was less than 0.10v with a signal error over 0.20v for 1 second, or the Desired EGR was 0v with an EGR signal of 0.40v or more, conditions met twice in 10 seconds |
Try also: https://www.obd-codes.com/p1406