P1275 OBD Trouble Code
4 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Accelerator Pedal Position Sensor 1 Circuit Conditions |
| Cause | Key on or engine running, system voltage over 7v, ETC serial data operational, then the PCM detected that the APP 1 sensor voltage was less than 0.2v or more than 4.8v, or that the APP 2 voltage was 0.2 volt more than expected at part throttle range, or that the APP 2 signal was 1.0 volt more than expected at full throttle range |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Accelerator pedal position (APP) sensor 1 - circuit malfunction |
| Cause | Wiring open circuit/short circuit to ground/ short circuit to positive, APP sensor, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Accelerator pedal position (APP) sensor 1 - circuit malfunction |
| Cause | Wiring open circuit/short circuit to ground/ short circuit to positive, APP sensor, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Air fuel (AF) ratio sensor 1 - response time |
| Cause | HO2S, AF sensor, fuel pressure, injectors, intake air leak, exhaust leak, MAF sensor |
Try also: https://www.obd-codes.com/p1275
