P1132 OBD Trouble Code
8 results found
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) 1, Bank 1 & 2 - heater control - circuit high |
Cause | Wiring short to positive, HO2S |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Lack of HO2S Switches, Sensor at Rich Limit Conditions |
Location | Bank 1 Sensor 1 |
Cause | Engine running in closed loop, then the PCM detected that the HO2S-11 signal did not switch because the fuel control system is at its rich limit |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) rich mixture indicated |
Location | Front (4 cyl) |
Cause | Wiring, HO2S, fuel pressure, fuel system, mechanical fault, ECM |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) control 1 - system too rich |
Cause | Intake/exhaust leak, HO2S |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Intake manifold air control solenoid - circuit malfunction |
Cause | Wiring, intake manifold air control solenoid, ECM |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) 1, Bank 1 - malfunction |
Cause | Wiring, HO2S, ECM |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) voltage low |
Location | Sensor 1 |
Cause | Wiring, HO2S, ECM |
Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
---|---|
Description | Heated oxygen sensor (HO2S) heater control - circuit high |
Location | Bank 1 & 2 Sensor 1 |
Cause | Wiring short to positive, HO2S |
Try also: https://www.obd-codes.com/p1132