P1000 OBD Trouble Code
5 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | OBD II Monitor Testing Not Complete Conditions |
| Cause | Key on or engine running, this code is set when a PCM Reset is performed and then one or more of the OBD II Main Monitors have not been completed It should be cleared from the PCM to pass an I/M Test for registration |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine control module (ECM) - internal error |
| Cause | ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | System diagnosis incomplete |
| Cause | Drive cycle incomplete, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine control module (ECM) memory erased - no codes stored |
| Cause | Memory erased, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | OBD 11 monitor testing not complete |
| Cause | Wiring, VSS sensor, mechanical fault, ECM |
Try also: https://www.obd-codes.com/p1000
