P0600 OBD Trouble Code
5 results found
| Type | Powertrain - Computer and Auxiliary Outputs - ISO/SAE Controlled |
|---|---|
| Description | Serial Communication Link |
| Type | Powertrain - Computer and Auxiliary Outputs - ISO/SAE Controlled |
|---|---|
| Description | PCM Fault, SPI Communications Conditions |
| Cause | Key on or engine running, then the PCM detected that the serial communications inside the controller failed 8 times Prior to replacing the PCM, inspect the PCM terminals for a shorted, grounded or open circuit condition |
| Type | Powertrain - Computer and Auxiliary Outputs - ISO/SAE Controlled |
|---|---|
| Description | Loss Of Serial Communication Link Conditions |
| Cause | Key on, then the PCM detected that serial data messages were not transmitted to other modules • Refer to code repair chart for instructions on how to replace a PCM or how to reprogram a replacement unit |
| Type | Powertrain - Computer and Auxiliary Outputs - ISO/SAE Controlled |
|---|---|
| Description | AT communication - circuit malfunction |
| Cause | Wiring, TCM |
| Type | Powertrain - Computer and Auxiliary Outputs - ISO/SAE Controlled |
|---|---|
| Description | ECM/TCM - communication malfunction |
| Cause | Wiring, ECM, TCM |
Try also: https://www.obd-codes.com/p0600
