P0326 OBD Trouble Code
3 results found
Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
---|---|
Description | Knock Sensor 1 Circuit Range/Performance |
Location | Bank 1 or Single Sensor |
Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
---|---|
Description | Knock Sensor 1 Circuit Performance Conditions |
Cause | Engine running, then the PCM detected a KS signal outside the calibrated value This code may set at key on if the KS signal is more than 0.5v |
Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
---|---|
Description | Knock Sensor Performance Conditions |
Cause | No PCM codes set, ECT input more than 140°F, engine runtime over 2 minutes, engine speed over 2200 rpm, throttle angle over 6%, then the PCM detected the Knock Sensor AC voltage input was less than a minimum value |
Try also: https://www.obd-codes.com/p0326