P0135 OBD Trouble Code

4 results found

P0135 - Generic
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

O2 Sensor Heater Circuit

Location Bank 1 Sensor 1
P0135 - Chrysler
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S Heater Circuit Conditions

Location Bank 1 Sensor 1
Cause

Cold engine startup requirement met (ECT sensor input under 147°F, BTS input within ± 59°F of ECT sensor input), then the test started and the PCM detected that the front HO2S-11 signal was over 3v for 30-90 seconds.

P0135 - Ford
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S Heater Circuit Conditions

Location Bank 1 Sensor 1
Cause

Engine running for 1 minute, then the PCM detected an open or short in the HO2S heater circuit

P0135 - GM
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S- Heater Circuit Conditions

Location Bank 1 Sensor 1
Cause

No CKP, ECT, EGR, EVAP, Fuel Trim, Fuel Injector, IAT, MAP, Misfire or TP sensor codes set, ECT and IAT sensor inputs less than 95°F and within 11°F of each other at startup, average MAF sensor airflow for sample period less than 20 g/sec, system voltage from 8-18v, then the PCM detected that the HO2S-11 signal remained within 150 mv of bias voltage (450 mv) for over 30-90 seconds (actual time is from 42 seconds up to 2 minutes).

Try also: https://www.obd-codes.com/p0135