P0106 OBD Trouble Code

4 results found

P0106 - Generic
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance

P0106 - Chrysler
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

BARO Out-Of-Range at Key On or MAP Sensor Signal Too Low Conditions

Cause

Key on for less than 350 ms, engine speed under 255 rpm, then the test started and the PCM detected a MAP sensor input of over 0.019v but less than 2.196v for 300 ms

P0106 - Ford
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

Barometric Pressure Sensor Performance Conditions

Cause

Engine running and the PCM detected an out-of-range BARO sensor signal

P0106 - GM
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

MAP Sensor Performance Conditions

Cause

DTC P0122 and P0123 not set, engine speed 500 rpm or higher, then the PCM detected that the MAP sensor input changed by more than 10 kPa in 12.5 milliseconds during a period when engine speed varied less than 4 RPM, throttle angle varied less than 1 degree, EGR fuel compensation varied less than 4% A/C clutch did not cycle, overheat/low coolant condition was not present, and Traction Control was not active.

Try also: http://www.obd-codes.com/p0106