P1586 OBD Trouble Code
5 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine mounting control solenoid, Bank 1 & 2 - short to positive |
| Cause | Wiring short to positive, engine mounting control solenoid |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Cruise Control Brake Switch 2 Circuit Conditions |
| Cause | Engine running with engine speed more than 1000 rpm (wheel speed indicates more than 20 mph in order to enable the test, and the test will disable when wheel speed is less than 5 mph), then the PCM detected that the vehicle speed decreased by 1 mph in 0.5 seconds without the PCM detecting a Brake switch transition, all conditions present for 10 Accel/Decel cycles. |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | AT coding signal - not plausible |
| Cause | Wiring, mechanical fault |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | AT coding signal |
| Cause | Wiring |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine mounting control solenoid, short to positive |
| Location | Bank 1 & 2 |
| Cause | Wiring short to positive, engine mounting control solenoid |
Try also: https://www.obd-codes.com/p1586
