P1575 OBD Trouble Code
3 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine mounting control solenoid, Bank 1 - short to positive |
| Cause | Wiring short to positive, engine mounting control solenoid |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Extended Travel Brake Switch Circuit Conditions |
| Cause | DTC P0703, P1574 or P1604 not set, ABS and Traction Control not failed and are not active, non-drive wheel speed has gone over 20 mph and then goes below 4 mph, then the PCM detected at least a 6 mph decrease in the non-drive wheel speed in 400 ms or that the Stop/BTSI/TCC brake Switch indicated the brakes were applied (and it did not detect a change in extended travel contacts of the TCC Brake Switch to indicate the brakes were applied) |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Engine mounting control solenoid, short to positive |
| Location | Bank 1 |
| Cause | Wiring short to positive, engine mounting control solenoid |
Try also: https://www.obd-codes.com/p1575
