P0136 OBD Trouble Code

4 results found

P0136 - Generic
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

O2 Sensor Circuit

Location Bank 1 Sensor 2
P0136 - Chrysler
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S Circuit Conditions

Location Bank 1 Sensor 2
Cause

Engine running, then the test started and the PCM detected that the Bank 1 HO2S-12 circuit had an open circuit condition.

P0136 - Ford
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S No Activity Circuit Conditions

Location Bank 1 Sensor 2
Cause

Engine running in closed loop for 5 minutes, then the PCM detected that the HO2S failed the maximum or minimum voltage range check (middle signal out-of-range)

P0136 - GM
Type Powertrain - Fuel and Air Metering - ISO/SAE Controlled
Description

HO2S Heater Circuit Conditions

Location Bank 1 Sensor 2
Cause

Engine speed over 1500 rpm in closed loop, IAT input 14-158°F, ECT input over 176°F, BARO input over 75 kPa, fuel level over 25%, VSS input 20-50 mph, then the PCM detected that the HO2S-12 maximum voltage was less than 600 mv for 8 minutes, or that the HO2S-12 minimum voltage was more than or equal to 300 mv after a maximum voltage check in Fuel Shutoff mode.

Try also: http://www.obd-codes.com/p0136